Question:
What is the direction of the signal from the CPE when using the monitor jacks on HxDSL HTUR?
Response:
Applies to HxTUR:
1223424 T200 H4TU-R
1223426 T200 H4TU-R
1223024 T200 H2TU-R
1223026 T200 H2TU-R
1246026 T200 HTU-R
Using a test set with 2 receivers.
- The TX or T/R is a monitor from the CPE/DCP toward the Network or HxTUC.
- The RX or T1/R1 is from the local loop or HxTUC/Network. Local Loop is the copper from the HxTUC to the HxTUR.
The signal is MON Non-Intrusive, do not use a Terminated reading. The test set can only monitor a REC. signal.
