

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
I've tried the default as documented User: admin Pass: password, but that didn't work. Any suggestions? I've tried lots of obvious ones. admin/adtran, admin/password, admin/1234, administrator/*
Is the default overwritten by the NetVanta 7100?
TIA
-Dan
Accepted Solutions

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Not the Solution
- Report Inappropriate Content
Dan,
Ok if your accessing the ip/admin interface it is admin/password. If doing just the IP address of phone then the login is user/password.
Let me know if that works. The 456 was for the phone menu button password.
-mark

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Accept as Solution
- Report Inappropriate Content
Re: Access 706/712 via web interface. Username/Password?
Dan,
Try admin/456. The default is over ridden after it gets config file from 7100.
-Mark


- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Accept as Solution
- Report Inappropriate Content
Re: Access 706/712 via web interface. Username/Password?
Yeah, I saw that setting in the IP Phone Globals page. No luck there either.

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Not the Solution
- Report Inappropriate Content
Dan,
Ok if your accessing the ip/admin interface it is admin/password. If doing just the IP address of phone then the login is user/password.
Let me know if that works. The 456 was for the phone menu button password.
-mark


- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Accept as Solution
- Report Inappropriate Content
Re: Access 706/712 via web interface. Username/Password?
Thanks! That's the answer.

- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Accept as Solution
- Report Inappropriate Content
Re: Access 706/712 via web interface. Username/Password?
I just wanted to clarify a little for others that come across this post:
To access the IP 712 or IP 706 normal phone web interface:
http://<current ip address of phone>
(example: http://10.10.20.7)
Username = user
Password = password
To access the IP 712 or IP 706 admin enabled phone web interface:
http://<current ip address of phone>/admin
(example: http://10.10.20.7/admin)
Username = admin
Password = password
To get the current IP address of a phone from the screen, go to Menu > 1.Phone Status > 2.Network > Use the down arrow until you see "IP Address". From a NetVanta 7100, you can also use the output of a show sip user-registration or navigate to Voice > Reports > Phone Registrations in the web interface.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Accept as Solution
- Report Inappropriate Content
Re: Access 706/712 via web interface. Username/Password?
Thank you its working
<ip address>/admin
User name : admin
Password : password