cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

Retrieve config from IP712

Jump to solution

I manually config'd a IP712 phone. How can I get that config from the phone?

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: Retrieve config from IP712

Jump to solution

Thanks for the clarification.  In that case you can use the admin guide that matches your firmware version to construct a configuration file:

IP 700 Series Admin Guide (version 1.3.16 and below)

I have attached a sample configuration file to build from.

Thanks,

Matt

View solution in original post

0 Kudos
3 Replies
Anonymous
Not applicable

Re: Retrieve config from IP712

Jump to solution

Unfortunately, there is no way to pull the configuration off of a phone if it is setup manually.  Does the phone not work by configuring it using the NetVanta 7100 web interface?  You can input extra settings by going to IP Phone Globals > Global Files tab > ADTRAN adtran_customer.txt tab, putting parameters in the text box, and clicking the Save button.

Thanks,

Matt

Anonymous
Not applicable

Re: Retrieve config from IP712

Jump to solution

The IP712 is connected to a NV6355 which is a proxy to my Metaswitch.

Anonymous
Not applicable

Re: Retrieve config from IP712

Jump to solution

Thanks for the clarification.  In that case you can use the admin guide that matches your firmware version to construct a configuration file:

IP 700 Series Admin Guide (version 1.3.16 and below)

I have attached a sample configuration file to build from.

Thanks,

Matt

0 Kudos