On NV150 I am able to pull stats for each VAP that I have configured with command
sh dot11 statistics interface dot11ap 1/1.1
Last clearing of "show interface" counters: never
Authentication Count: 17
Deauthentication Count: 13
Association Count: 17
Disassociation Count: 1
Reassociation Count: 0
Wireless MSDU Rx Packets: 42682
Wireless Data Rx Packets: 206979
Wireless Multicast Rx Packets: 9635
Wireless Management Rx Packets: 88658
Wireless Control Rx Packets: 0
Wireless MSDU Tx Packets: 1803505
Wireless Data Tx Packets: 891632
Wireless Multicast Tx Packets: 1729183
Wireless Management Tx Packets: 31953
Wireless Control Tx Packets: 0
For NV160 this is the results that I get
sh dot11 statistics interface dot11ap 2/1.1
No available stats for this AP type.
Thank you for asking this question in the support community. Unfortunately, at the time of this post, the NV16Xs do not support the statistics generated from the show dot11 statistics interface dot11ap <interface> command. Therefore, the output generated from the command is "No available stats for this AP type." The command is intended for the NV150s.
I hope that makes sense, but please do not hesitate to reply to this post with any additional questions or information. I will be happy to help in any way I can.
Levi
Thank you for asking this question in the support community. Unfortunately, at the time of this post, the NV16Xs do not support the statistics generated from the show dot11 statistics interface dot11ap <interface> command. Therefore, the output generated from the command is "No available stats for this AP type." The command is intended for the NV150s.
I hope that makes sense, but please do not hesitate to reply to this post with any additional questions or information. I will be happy to help in any way I can.
Levi
I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post to unmark it and select another in its place with the applicable buttons. If you have any additional information on this that others may benefit from, please come back to this post to provide an update. If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.
Thanks,
Noor