Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable
‎04-18-2017 12:23 PM

1234P wont connect to customers network

Customer network is made up of dlinks.  A POE version went bad.  Trying to replace it with 1234P that they bought for future project.  It will not pass network activity.  Any thoughts

0 Kudos
Reply
1 Reply
jayh
Honored Contributor
Honored Contributor
‎04-19-2017 12:05 PM

Re: 1234P wont connect to customers network

It could be one of several things.

  • Does the port between the switches show link up? If either side is hard-coded for speed and duplex the other side must match and you will probably need to use a crossover cable.
  • Is either switch configured for VLANs and/or trunking? Even if link is up, this provisioning must match.

Those would be the first couple of things to check.

0 Kudos
Accept as Solution Reply