cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
leebones77
New Contributor

NetVanta POE

Jump to solution

Why does NetVanta 1238P not privide total allowed power usage ?   Of the 370 watts the documentation says can be supplied, after 97 newly added units are being denied power.

Labels (1)
0 Kudos
1 Solution

Accepted Solutions
jhall
New Contributor III

Re: NetVanta POE

Jump to solution

You should see this information in the web interface under Data/Power over ethernet. Here's from one of my switches:

Total Power: 384W
Total Power Used: 11.563W
Total Power Available: 372.437W
Average Total Power: 11.124W

There was a bug in one of the versions of firmware where it would stop providing POE to new devices. Not sure what version but if your not on the latest I would upgrade.

View solution in original post

0 Kudos
2 Replies
jhall
New Contributor III

Re: NetVanta POE

Jump to solution

You should see this information in the web interface under Data/Power over ethernet. Here's from one of my switches:

Total Power: 384W
Total Power Used: 11.563W
Total Power Available: 372.437W
Average Total Power: 11.124W

There was a bug in one of the versions of firmware where it would stop providing POE to new devices. Not sure what version but if your not on the latest I would upgrade.

View solution in original post

0 Kudos
leebones77
New Contributor

Re: NetVanta POE

Jump to solution

Thanks jhall, the firmware upgrade seems to have solved my problem. Was running 10.5 firmware and upgraded to 10.9.2 to clear issues. New devices are delivered power now.