I am learning. I have a NetVanta 1531P with port Gigabit 0/10 connected to my Windows laptop. The laptop Ethernet port is static assigned 100.100.60.199/24.
(I have attached my 1531P config to this post.)
If I assign IP address 100.100.60.97/24 to "VLAN 1", I can ping it from the laptop.
However, if I instead assign the IP address 100.100.60.97 to "VLAN 901", I cannot ping it. Even setting "switchport mode trunk" on port Gigabit 0/10 makes no difference.
What am I missing? Thanks so much. --Walter
you need to add to your command the default vlan to the commands
switchport mode trunk
switchport trunk native vlan 901. this will cause untagged data to be processed by adding a vlan on it.
another approach would be to issue the following commands
switchport mode access
switchport access vlan 901.
hope that this helps.