BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
drjarmon
New Contributor III

How do restart LLDP TX

Jump to solution

Adtran 1544 / R10.9.0 has stopped transmitting LLDP.  Receives LLDP counters and Neighbors info looks fine.  Is there away to restart without have to reboot switch?

Firmware VersionR10.9.0
Part Number1702544G1

Don Jarmon

Labels (1)
Tags (1)
0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: How do restart LLDP TX

Jump to solution

under CLI use the following command:

clear lldp neighbors

View solution in original post

0 Kudos
2 Replies
Anonymous
Not applicable

Re: How do restart LLDP TX

Jump to solution

under CLI use the following command:

clear lldp neighbors

0 Kudos
Anonymous
Not applicable

Re: How do restart LLDP TX

Jump to solution

Don,

I am marking this assumed answered. However, if you have more to add please do not hesitate to do so.

Thanks,

Evan