Preface: I'm not an IT expert
We have an Adtran Netvana 3200 router with a T1 Wan interface.
The T1 interface seemed to be dead, plugging into our Verizon smart jack doesn't affect the status LED's, they stay the same as with nothing connected.
I am able to get in via the console port, and use the CLI
In the CLI, show interface T1 1/1 yields "t1 1/1 is admin down"
I decided to go in through the Ethernet port, but that doesn't connect either - no indication at all on my mini hub.
the show interface eth 0/1 yields "eth 0/1 is admin down. line protocol is DOWN"
Is there a step to activate these interfaces, or do I have an equipment failure?
Thanks, Art
