Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
hanpaver
New Contributor
‎12-06-2018 08:50 AM

How do i configure my router to use a point to point connection over comcast cable.

Jump to solution

I am switching from a point to point t1 line and am having trouble with bringing the new Point to point thru Comcast Cable.  What changes are need to be made or do I need a new Router.

Building configuration...

!

! ADTRAN, Inc. OS version R11.4.2

! Boot ROM version 17.02.01.00

! Platform: NetVanta 3200, part number 1203860G1

!

hostname "NetVanta3200_Main_PTP"

enable password MMFZ1815

!

clock timezone -5-Eastern-Time

!

ip subnet-zero

ip classless

ip routing

!

auto-config

!

event-history on

no logging forwarding

no logging email

!

no ip firewall alg msn

no ip firewall alg mszone

no ip firewall alg h323

!

no dot11ap access-point-control

!

interface eth 0/1

  ip address  172.16.0.23  255.255.255.0

  no shutdown

!

interface t1 1/1

  clock source internal

  tdm-group 1 timeslots 1-24 speed 64

  no shutdown

!

interface ppp 1

  ip address  10.10.10.1  255.255.255.252

  no shutdown

  cross-connect 1 t1 1/1 1 ppp 1

!

ip route 0.0.0.0 0.0.0.0 172.16.0.1

ip route 172.16.10.0 255.255.254.0 ppp 1

ip route 172.16.10.0 255.255.254.0 172.16.10.1

!

no tftp server

no tftp server overwrite

http server

no http secure-server

no snmp agent

no ip ftp server

no ip scp server

no ip sntp server

!

sip udp 5060

sip tcp 5060

0 Kudos
Reply
1 Solution

Accepted Solutions
Anonymous
Not applicable
‎12-07-2018 07:50 AM

Re: How do i configure my router to use a point to point connection over comcast cable.

Jump to solution

Respectfully, you would be better served hiring a local Adtran reseller to do this work for you. The 3200 only has a single ethernet interface, so if your comcast actually is point to point, it will be delivered with an ethernet handoff. You will have to use a managed switch and 802.1q tagged sub interfaces to get it into that router. If your comcast connection is just a cablemodem, you could use a gre tunnel over a tagged interface but the software version in the config you posted doesn't have the E suffix, so you won't be able to set up vpn to encrypt the traffic. Your router would need the enhanced feature pack for that.

View solution in original post

0 Kudos
Reply
1 Reply
Anonymous
Not applicable
‎12-07-2018 07:50 AM

Re: How do i configure my router to use a point to point connection over comcast cable.

Jump to solution

Respectfully, you would be better served hiring a local Adtran reseller to do this work for you. The 3200 only has a single ethernet interface, so if your comcast actually is point to point, it will be delivered with an ethernet handoff. You will have to use a managed switch and 802.1q tagged sub interfaces to get it into that router. If your comcast connection is just a cablemodem, you could use a gre tunnel over a tagged interface but the software version in the config you posted doesn't have the E suffix, so you won't be able to set up vpn to encrypt the traffic. Your router would need the enhanced feature pack for that.

0 Kudos
Reply