cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
New Contributor

Activating interfaces

Preface: I'm not an IT expert

We have an Adtran Netvana 3200 router with a T1 Wan interface.

The T1 interface seemed to be dead, plugging into our Verizon smart jack doesn't affect the status LED's, they stay the same as with nothing connected.

I am able to get in via the console port, and use the CLI

In the CLI, show interface T1 1/1 yields "t1 1/1 is admin down"

I decided to go in through the Ethernet port, but that doesn't connect either - no indication at all on my mini hub.

the show interface eth 0/1 yields "eth 0/1 is admin down. line protocol is DOWN"

Is there a step to activate these interfaces, or do I have an equipment failure?

Thanks, Art

Labels (1)
0 Kudos
Reply
1 Reply
Highlighted
New Contributor

Re: Activating interfaces

Scratch this request, I found the "no shutdown" command

0 Kudos
Reply