help connecting two 3200 series routers using PPP

[tamustudent]

having trouble getting two NetVanta 3200 routers to connect using PPP.

the running configurations are as follows

interface eth 0/1   speed auto   no ip address   bridge-group 1   no shutdown ! interface t1 1/1   tdm-group 1 timeslots 1-24 speed 64   no shutdown interface t1 1/2   shutdown ! interface bri 1/3   shutdown ! interface ppp 1   ip address  60.60.60.2  255.255.255.0   bridge-group 1   bridge-group 1 spanning-disabled   no shutdown   cross-connect 1 t1 1/1 1 ppp 1 !

[Anonymous · Accepted solution]

- It looks like you are trying to bridge across T1/PPP link. The way you would go about configuring bridging on an AOS device depends on the firmware you are running. The document below describes what you will need to do to set this up:

Configuring Bridging in AOS

It would also be helpful to see the configurations of both 3200s as well as the output to "show interface". Please remember to remove any sensitive information. Please do not hesitate to let us know if you have any further questions.

Thanks,

Noor

[Anonymous]

-

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post to unmark it and select another in its place with the applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Noor