BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
dmc
New Contributor II

Sluggish requests - firewall config?

Jump to solution

So our organization recently upgraded our internet connection and we now have a NetVanta 3430 (second generation).

We're a small office about 15 people (max) and we have a dedicated 10 up / 10 down connection from Verizon. Download / Upload speeds seem ok, but web pages are loading sluggishly and it feels like a lot of requests fail to complete in a timely fashion.

I'm getting a lot of messages like the below from the router (I'd say at least one of either of these every couple of minutes).

sg="TCP connection request received is invalid (expected SYN, got ACK), dropping packet; flags=0x11 Src 4086 Dst 80 from Private policy-class on interface eth 0/2" agent=AdFirewall

msg="Zero bytes transferred for connection Src 49937 Dst 80 from Private policy-class on interface eth 0/2" agent=AdFirewall

I've attached the current config. Appreciate your help - thanks.

Tags (1)
0 Kudos
1 Solution

Accepted Solutions
dmc
New Contributor II

Re: Sluggish requests - firewall config?

Jump to solution

I found I also had a lot of input errors on the interface ethernet 0/2. I've changed the speed/duplex to "auto" for both interfaces and that seems to have stopped these errors. Web page requests seem a bit more responsive now.

View solution in original post

0 Kudos
2 Replies
dmc
New Contributor II

Re: Sluggish requests - firewall config?

Jump to solution

I found I also had a lot of input errors on the interface ethernet 0/2. I've changed the speed/duplex to "auto" for both interfaces and that seems to have stopped these errors. Web page requests seem a bit more responsive now.

0 Kudos
dmc
New Contributor II

Re: Sluggish requests - firewall config?

Jump to solution

For anyone else with similar issues, the "speed/duplex" setting was definitely our issue. After trying different combinations everything seems to be working properly now.