The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

ip ffe - applied to interfaces by default?

Jump to solution

Is 'ip ffe' being enabled on all interfaces by default in the newer AOS firmware?  If so, what version of AOS did this first appear?

Thanks,

Dan    

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: ip ffe - applied to interfaces by default?

Jump to solution

The fast forwarding engine (FFE) was enabled by default, starting in AOS firmware version R10.4.0.  The release notes (attached) for that firmware revision have it listed under the "Features and Enhancements" heading:

  • Added IPv6 support for RapidRoute, AOS's fast forwarding engine. Both IPv6 and IPv4 RapidRoute are now enabled by default.

Please, let me know if you have any further questions.

Levi

View solution in original post

0 Kudos
3 Replies
anchor
New Contributor III

Re: ip ffe - applied to interfaces by default?

Jump to solution

No, it's not on by default but is recommended by Adtran...

Maybe someone else knows when it was added?

Anonymous
Not applicable

Re: ip ffe - applied to interfaces by default?

Jump to solution

The fast forwarding engine (FFE) was enabled by default, starting in AOS firmware version R10.4.0.  The release notes (attached) for that firmware revision have it listed under the "Features and Enhancements" heading:

  • Added IPv6 support for RapidRoute, AOS's fast forwarding engine. Both IPv6 and IPv4 RapidRoute are now enabled by default.

Please, let me know if you have any further questions.

Levi

0 Kudos
anchor
New Contributor III

Re: ip ffe - applied to interfaces by default?

Jump to solution

That's good to know Levi, thanks