jwhitten
New Contributor
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
10-31-2012
03:52 PM
Hello,
I have a NetVanta 4430 and I need to enable the Eth 0/1 port and it is stubbornly refusing to come up. I'm having the same problem on three different routers so it must be some config issue.
Here is the config for the port on one of the routers:
interface eth 0/1
description Test Network
ip address 172.16.x.y 255.255.255.0
ip mtu 1500
no rtp quality-monitoring
no shutdown
What am I missing?
Thanks!
John
1 Solution
Accepted Solutions
jwhitten
New Contributor
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Not the Solution
- Report Inappropriate Content
10-31-2012
04:14 PM
2 Replies
jwhitten
New Contributor
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Not the Solution
- Report Inappropriate Content
10-31-2012
04:14 PM
I just solved it!
*whew*
Bad crossover cable 🙂
Case closed!

Anonymous
Not applicable
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Accept as Solution
- Report Inappropriate Content
09-06-2013
11:30 AM