BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
mjindal01
New Contributor

EVC config on Adtran 4660

I have one Adtran Router on platform: NetVanta 4660 EoX L2/L3 Router having OS version R10.11.0.E. There is an EVC configured on Adtran router having the following configuration:

interface gigabit-eth 0/1
  speed 1000 nonegotiate
  no shutdown
!
interface gigabit-eth 0/1.2
  ce-vlan-id 10
  connect evc dolphin
  ip address  1.1.1.1  255.255.255.252
  no shutdown
interface gigabit-eth 0/1.3
  ce-vlan-id 20
  connect evc dolphin
  ip address  2.2.2.1  255.255.255.252
  shutdown
!

evc dolphin
  s-tag 150
  connect men-port gigabit-ethernet 0/1
  no shutdown
!

Can anyone explain me this EVC configuration?

As i have searched on internet i have found that it creates Layer 3 Carrier Ethernet. But i am not able to understand it traffic flow.
It will forward layer 2 information or layer 3 information.

Regards,
Mukesh Kumar
Network Engineer
Spooster IT Services

0 Kudos
1 Reply
Anonymous
Not applicable

Re: EVC config on Adtran 4660

mjindal01:

Thank you for asking this question in the support community!

The Layer 2 & Layer 3 Carrier Ethernet Services in AOS guide explains the differences between Layer 2 and Layer 3 traffic flow.  I hope that makes sense, but please do not hesitate to reply to this post with additional questions.  I will be happy to help in any way I can.

Levi