Simple routing to internet

[buc]

I have a 4305 Netvanta I'm trying to test as a router to the internet (cable modem with with 1 static ip). I need to use the ethernet ports only, not the T1 interface. I have plugged the cable modem side into ETH 0/1 and a computer into the ETH port 0/2. I have set the ETH 0/1 to the static ip assigned (74.181.81.66), set the subnet(255.255.255.252)  and gateway (75.189.81.65). I have set the ETH 0/2 side to a private lan ip 192.168.6.1/24. I have set up a computer and plugged into ETH 0/2. The computer has a 192.168.6.100/24 with a gateway 192.168.6.1 and DNS of 192.168.6.1 and 4.2.2.2. I set up both ETH's as IPROUTING. Doesn't work. What else needs configuring? I have added a default rt of 0.0.0.0 to the 74.181.81.65.

THanks a bunch,

BUC

[Anonymous · Accepted solution]

:

Thank you for asking this question in the support community.

To set the unit up as an Internet router, one thing you did not mention above is covered in step six (page 10) "Using the Firewall Wizard to Setup Internet Connection Sharing NAPT" in the guide Configuring Ethernet Broadband Access in AOS.

Also, here is a video on Configuring Internet Access (Many to one NAT) with the Firewall Wizard in AOS which may be helpful.

Please, let me know if you have any additional questions.  I will be happy to help in any way I can.

Levi

[Anonymous]

:

I went ahead and flagged this post as “Assumed Answered.”  If any of the responses on this thread assisted you, please mark them as either Correct or Helpful answers with the applicable buttons.  This will make them visible and help other members of the community find solutions more easily.  If you still need assistance, I would be more than happy to continue working with you on this - just let me know in a reply.

Levi

[Anonymous]

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Noor