Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable
‎04-23-2014 02:58 PM

Question has anyone connected an Altigen pbx to a 7100 over a sip trunk

Jump to solution


I have a customer that has a location with an Altigen pbx at one location and a 7100 at another location. They want to be able to transfer calls and to call extensions at each location over a sip trunk. Has anyone done this and can it be done without a gateway in between?

Labels (2)
0 Kudos
Reply
1 Solution

Accepted Solutions
Anonymous
Not applicable
‎07-08-2014 02:44 PM

Re: Question has anyone connected an Altigen pbx to a 7100 over a sip trunk

Jump to solution

tschupp,

I'm not aware of anyone ever setting up SIP Trunking between an Altigen PBX and 7100, but suspect PBX-to-PBX calling would work fine.  However, you could experience interoperability issues with blind and/or assisted transfers between systems... 

View solution in original post

0 Kudos
Reply
1 Reply
Anonymous
Not applicable
‎07-08-2014 02:44 PM

Re: Question has anyone connected an Altigen pbx to a 7100 over a sip trunk

Jump to solution

tschupp,

I'm not aware of anyone ever setting up SIP Trunking between an Altigen PBX and 7100, but suspect PBX-to-PBX calling would work fine.  However, you could experience interoperability issues with blind and/or assisted transfers between systems... 

0 Kudos
Reply