The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

BCS outbound fax

Jump to solution


trying to get outbound fax to work any ideas?

inbound is fine.

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: BCS outbound fax

Jump to solution

I got it working.

Mark from Adtran contacted me, he pointed out that I had two Adtran 7000's on the BCS and I needed to set the priority lower on the 7100 that I wanted to send the fax to.  After that the BCS sent sip calls to the 7100 that I had the debug running on.

View solution in original post

0 Kudos
5 Replies
Anonymous
Not applicable

Re: BCS outbound fax

Jump to solution

At what point is it failing?

Are you using SIP trunks to send the fax to the PSTN?

Anonymous
Not applicable

Re: BCS outbound fax

Jump to solution

sip trunk to the 7100.  debuging 7100 I see nothing coming from the BCS.  on the BCS I see it attempting in the fax que but it fails.

Anonymous
Not applicable

Re: BCS outbound fax

Jump to solution

Brian,

I would start with a PCAP from the UC server to see if there is an INVITE destined to the correct IP address for the NetVanta 7100.  The software log (c:\ADTRANLogs\) would be also be a good thing to look at by searching for the number you are trying to send a fax to.  A dialing restriction could potentially cause something like this.

Thanks,
Matt

Anonymous
Not applicable

Re: BCS outbound fax

Jump to solution

I got it working.

Mark from Adtran contacted me, he pointed out that I had two Adtran 7000's on the BCS and I needed to set the priority lower on the 7100 that I wanted to send the fax to.  After that the BCS sent sip calls to the 7100 that I had the debug running on.

0 Kudos
Anonymous
Not applicable

Re: BCS outbound fax

Jump to solution

That Mark guy must be pretty good! Actually Adam Ackerman gets credit for this!

Glad it is working now!