Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
leer
New Contributor
‎12-20-2021 11:21 AM

924e 2nd Gen SIP TLS Supported?

I'm trying to enable SIP TLS on a 2nd Gen 900e, but the commands aren't appearing in version R13.6.0.E.  I dig around but couldn't find any release note or document saying if it was supported or not.  Is it only supported on 3rd gen units?

0 Kudos
Reply
1 Reply
bmullarwnapsnc
New Contributor III
‎12-21-2021 03:39 PM

Re: 924e 2nd Gen SIP TLS Supported?

You can review the associated Feature Matrix on the Support Community at the link below:

https://supportcommunity.adtran.com/t5/Enterprise-Product-Feature/Router-IPBG-Feature-Matrix/ta-p/36...

Rows 310, 311, and 312 list "SIP TLS".  On the left column in the NetVanta Router section select the CLEAR button.  In the IP Business Gateway section only leave checkmarks in the 900, 900E, and DISCONTINUED IPBGs & IP PBXs.

The SIP TLS "is not" supported in the TA900 / TA900E 1st Gen and 2nd Gen units, or the TA900 3rd Gen units.

The SIP TLS "is" supported in the TA900E 3rd Gen units, but with some SBC requirements and software release versions.

SIP TLS and SRTP (SIP-to-SIP Trunks) {R13.2.1} SBC only
SIP TLS and SRTP (SIP-to-TDM) {R11.5.0} Supported
SIP TLS and SRTP (Stateful SIP Proxy Only) {R13.1.0} SBC FP Required

 

Hope this helps.

 

0 Kudos
Accept as Solution Reply