Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable
‎05-12-2016 08:39 AM

Change Frequency of "PRI 3 D channel is DOWN" event message

Jump to solution

I am running AOS R11.12.0.E and when my PRI is down, every 5 seconds their is an informational event showing that the PRI is down. When troubleshooting a configuration issue to fix the PRI, a status message every 5 seconds is ANNOYING. I understand I could do "no event" or shut the interface but I don't want to do either of those. Is their a way to change the frequency of this informational event? Ex: every 30 seconds instead of 5

2016.05.12 09:27:51 ISDN.EP     PRI  3  D channel is DOWN

2016.05.12 09:27:56 ISDN.EP     PRI  3  D channel is DOWN

2016.05.12 09:28:01 ISDN.EP     PRI  3  D channel is DOWN

2016.05.12 09:28:06 ISDN.EP     PRI  3  D channel is DOWN

2016.05.12 09:28:11 ISDN.EP     PRI  3  D channel is DOWN

2016.05.12 09:28:16 ISDN.EP     PRI  3  D channel is DOWN

2016.05.12 09:28:21 ISDN.EP     PRI  3  D channel is DOWN

2016.05.12 09:28:26 ISDN.EP     PRI  3  D channel is DOWN

2016.05.12 09:28:31 ISDN.EP     PRI  3  D channel is DOWN

2016.05.12 09:28:36 ISDN.EP     PRI  3  D channel is DOWN

2016.05.12 09:28:41 ISDN.EP     PRI  3  D channel is DOWN

Labels (2)
Labels
Tags (2)
0 Kudos
Reply
1 Solution

Accepted Solutions
Anonymous
Not applicable
‎05-17-2016 09:31 AM

Re: Change Frequency of "PRI 3 D channel is DOWN" event message

Jump to solution

George, normally that message is a one-time event, so for it to be showing up like that, it likely means your D channel is flapping. In any case, there is no way to alter the frequency of the message other than entering "no event". Thanks

Jay

View solution in original post

0 Kudos
Reply
3 Replies
Anonymous
Not applicable
‎05-17-2016 09:31 AM

Re: Change Frequency of "PRI 3 D channel is DOWN" event message

Jump to solution

George, normally that message is a one-time event, so for it to be showing up like that, it likely means your D channel is flapping. In any case, there is no way to alter the frequency of the message other than entering "no event". Thanks

Jay

0 Kudos
Reply
jayh
Honored Contributor
Honored Contributor
‎05-18-2016 01:41 AM

Re: Change Frequency of "PRI 3 D channel is DOWN" event message

Jump to solution

Something is unhappy with the PRI or underlying T1.

  • Timing slips? Exactly one side of the T1 should source clock.
  • ISDN switch type mismatch.
  • Both sides role user or both sides role network.
  • Framing/coding mismatch. PRI wants ESF/B8ZS on both sides.
0 Kudos
Accept as Solution Reply
Anonymous
Not applicable
‎05-18-2016 10:10 AM

Re: Change Frequency of "PRI 3 D channel is DOWN" event message

Jump to solution

Yep, I understand how PRI clocking, framing, coding...etc. work. I'm lab testing this device and I'm just thinking when we're turning up a new customer and trying to diagnose why the D-channel won't come up, that message is going to be obnoxious. I'll just have to use "no event" since there doesn't seem to be any other way.

Thanks for the input!

0 Kudos
Accept as Solution Reply