cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
in4ni
New Contributor

Could not connect isdn-group 1 to the trunk.

Jump to solution

I cant figure out why I am getting the following error message

This configuration is generated with a utility provided by the PBX vendor, I have used it many times on a TA908e but not on a TA908

This 908 is configured as a PRI(pstn) to SIP(pbx) gateway

Thank you

******** Error in line 180 of startup-config ********

TA908(config-T01)#connect isdn-group 1

  connect isdn-group 1

%Could not connect isdn-group 1 to the trunk.

____________________________________________________________

!
!
! ADTRAN, Inc. OS version A5.03.00.E
! Boot ROM version 14.04.00
! Platform: Total Access 908 (2nd Gen), part number 4212908L1

!
!
hostname "TA908"
enable password password
!
!
ip subnet-zero
ip classless
ip routing
!
!
ip domain-proxy
!
!
no auto-config
!
event-history on
no logging forwarding
no logging email
!
no service password-encryption
!
username "admin" password "password"
!
banner motd #

        Important 
       
Web username/password is configured to admin/password.
Enable and Telnet passwords are configured to "password".
Please change them immediately, if you have not changed them.

The ethernet 0/1 interface is enabled with an address of 192.168.100.251
Telnet/SSH access is also enabled.
#
!
!
no ip firewall alg msn
no ip firewall alg mszone
no ip firewall alg h323
!

!
no dot11ap access-point-control
!
!
!
!
interface eth 0/1
  ip address  192.168.100.251  255.255.255.0
  media-gateway ip primary
  no shutdown
!
!
!
interface t1 0/1
  shutdown
!
interface t1 0/2
  description PRI
  tdm-group 1 timeslots 1-24 speed 64
  no shutdown
!
!
interface pri 1
  description pri 1
  connect t1 0/2 tdm-group 1
  role user
  no shutdown
!
!
interface fxs 0/1
  no shutdown
!
interface fxs 0/2
  no shutdown
!
interface fxs 0/3
  no shutdown
!
interface fxs 0/4
  no shutdown
!
interface fxs 0/5
  no shutdown
!
interface fxs 0/6
  no shutdown
!
interface fxs 0/7
  no shutdown
!
interface fxs 0/8
  no shutdown
!
!
isdn-group 1
  connect pri 1
!
isdn-number-template 1 prefix "" subscriber NXX-XXXX
isdn-number-template 2 prefix "" national NXX-NXX-XXXX
isdn-number-template 3 prefix "" international 011-X$
isdn-number-template 4 prefix "" national 1NXX-NXX-XXXX
!
!
!
ip route 0.0.0.0 0.0.0.0 192.168.100.1
!
no ip tftp server
no ip tftp server overwrite
ip http server
no ip http secure-server
no ip snmp agent
no ip ftp server
no ip scp server
no ip sntp server
!
!!
ip sip
ip sip udp 5060
no ip sip tcp
!
!
!
voice feature-mode network
voice transfer-mode local
voice forward-mode local
!
!
!
voice codec-list G711_G729
  default
  codec g711ulaw
  codec g729
!
!
voice trunk-list PBX_TRUNK
  trunk T02
!
!
voice trunk T01 type isdn
  description "PSTN"
  resource-selection linear descending
  connect isdn-group 1
  modem-passthrough
  t38
  rtp delay-mode adaptive
!
voice trunk T02 type sip
  description "PBX"
  sip-server primary 192.168.100.250
  codec-group G711_G729
  grammar from host local
  grammar from host override registered-users sip-server
  update-supported
  transfer-mode network
  no prefer reinvite-without-sdp
!
!
voice grouped-trunk PBX
  description "PBX SIP Trunks"
  trunk T02
  accept XXXX cost 0
  accept NXX-XXXX cost 0
  accept NXX-NXX-XXXX cost 0
  accept 0-NXX-NXX-XXXX cost 0
  accept 1-NXX-NXX-XXXX cost 0
  accept 411 cost 0
  accept 611 cost 0
  accept 911 cost 0
  accept 011$ cost 0
  accept *$ cost 0
  accept #$ cost 0
  accept 9NXX-XXXX cost 0
  accept 9NXX-NXX-XXXX cost 0
!
!
voice grouped-trunk PSTN
  description "PSTN PRI Trunks"
  trunk T01
  accept NXX-XXXX cost 0
  accept NXX-NXX-XXXX cost 0
  accept 0-NXX-NXX-XXXX cost 0
  accept 1-NXX-NXX-XXXX cost 0
  accept *$ cost 0
  accept 411 cost 0
  accept 611 cost 0
  accept 911 cost 0
  accept 011-$ cost 0
  reject 976-XXXX
  reject 1-900-NXX-XXXX
  reject 1-976-NXX-XXXX
  permit list PBX_TRUNK
  !deny all other trunks
  !deny all other ani
!
!
!
ip sip authenticate
!
!
!
no ip sip prefer double-reinvite
!
!
!
line con 0
  no login
!
line telnet 0 4
  login
  password password
  no shutdown
line ssh 0 4
  login local-userlist
  no shutdown
!
!
!
!
!
end

Labels (2)
Tags (3)
0 Kudos
1 Solution

Accepted Solutions
david
Valued Contributor
Valued Contributor

Re: Could not connect isdn-group 1 to the trunk.

Jump to solution

In4ni,

Thanks for posting!  I assume that what you have pasted above is the output from the utility.  Can you reply us the output of "show run" from this unit?  It's possible the isdn-group is already attached or something else might be amiss in the current running configuration on the unit.

Thanks!

David

View solution in original post

0 Kudos
2 Replies
david
Valued Contributor
Valued Contributor

Re: Could not connect isdn-group 1 to the trunk.

Jump to solution

In4ni,

Thanks for posting!  I assume that what you have pasted above is the output from the utility.  Can you reply us the output of "show run" from this unit?  It's possible the isdn-group is already attached or something else might be amiss in the current running configuration on the unit.

Thanks!

David

View solution in original post

0 Kudos
david
Valued Contributor
Valued Contributor

Re: Could not connect isdn-group 1 to the trunk.

Jump to solution

Harlin,

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

David