BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
jlvega
New Contributor II

How to force 011 on a PRI emulation scenario?

Jump to solution

We have a PRI on a TA916e.  The international calls are not working because the PBX is activating the International call flag and removing the 011 from the dialed digits.  How do I force the Adtran to add the 011 when the international flag is on?

Labels (3)
0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: How to force 011 on a PRI emulation scenario?

Jump to solution

Can you run the following debug, then place an outbound call, then send us the debug.

Debug sip stack messages

Debug isdn l2-formatted

Debug isdn endpoint

Debug voice verbose

Thanks,

-Mark

View solution in original post

0 Kudos
1 Reply
Anonymous
Not applicable

Re: How to force 011 on a PRI emulation scenario?

Jump to solution

Can you run the following debug, then place an outbound call, then send us the debug.

Debug sip stack messages

Debug isdn l2-formatted

Debug isdn endpoint

Debug voice verbose

Thanks,

-Mark

0 Kudos