The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
shubert69
New Contributor

Invalid when making inbound call

Hi Folks,

I am trying to make a inbound call toward the provider.  I did cannibalized another configuration file 9henc the long access-list).

I am seeing an invalid error (404 SIP message)

essentially the INVITE goes to the Adtran which rejects it.

I do have a configuration with two PROVIDER that works. I've tried Ip and FQDN.. Still same error.

I admit that my knowledge in the Adtran configuration is extremely limited at this stage. I believe my "accept" are correct.

Is my configuration ok as far as the permissions? AS well is there a debug utility can I can use in the Adtran to take a closer peek?

I am using the Adtran as A B2BUA

Thank you in advance!

!
!
! ADTRAN, Inc. OS version R10.9.6.E
! Boot ROM version R10.9.3.B2
! Platform: Total Access 908e (3rd Gen), part number 4243908F1
! Serial number CFG1422022
!
!
hostname "something"
enable password XXXXX
!
!
clock timezone -5-Eastern-Time
!
ip subnet-zero
ip classless
ip default-gateway xxx.xxx.xxx.xxx
ip routing
ipv6 unicast-routing
!
!
domain-name "xxxxx"
name-server aaa.aaa.aaa.aaa
!
!
no auto-config
!
event-history on
no logging forwarding
no logging email
!
no service password-encryption
!
username "admin" password "XXXXX"
!
ip policy-timeout tcp telnet 14400
ip policy-timeout udp 5060 600
!
ip firewall
no ip firewall alg msn
no ip firewall alg mszone
no ip firewall alg h323
!
!
!
!
!
!
!
!
no dot11ap access-point-control
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface eth 0/1
  description LAN Side
  speed 100
  ip address  aaa.aaa.aaa.aaa  255.255.255.0
  ip access-policy inside
  ip flow ingress
  ip flow egress
  media-gateway ip primary
  no shutdown
!
!
interface eth 0/2
  description Wan Side
  speed 100
  ip address  bbb.bbb.bbb.bbb  255.255.255.0
  ip access-policy outside
  ip flow ingress
  ip flow egress
  media-gateway ip primary
  no shutdown
!
!
!
!
ip access-list extended REMOTE_MANAGEMENT_ACCESS
  permit tcp any  any eq www   log
  permit tcp any  any eq telnet   log
  permit udp any  any eq snmp    log
  permit tcp any  any eq https   log
  permit tcp any  any eq ssh   log
  permit tcp any  any eq ftp   log
  permit icmp any  any  echo   log
!
ip access-list extended web-acl-3
  permit ip any  any   
!
ip access-list extended web-acl-4
  remark any : eth 0/1
  permit ip any  any   
!
ip access-list extended web-acl-6
  permit tcp any  any eq www 
  permit tcp any  any eq https 
  permit tcp any  any eq ssh 
  permit tcp any  any eq telnet 
  permit udp any  any eq snmp  
  permit icmp any  any  echo 
!
ip access-list extended web-acl-8
  remark sip
  permit udp any  any eq 5060  
!
!
!
!
ip policy-class inside
  nat source list web-acl-4 interface eth 0/2 overload policy outside
  allow list web-acl-3
!
ip policy-class outside
  allow list web-acl-6 self
  allow list web-acl-8
!
!
!
ip route 0.0.0.0 0.0.0.0 xxx.xxx.xxx.xxx
!
no tftp server
no tftp server overwrite
http server
http session-timeout 1800
no http secure-server
snmp agent
no ip ftp server
no ip scp server
no ip sntp server
!
!
!
!
snmp-server community netsol RO
!
!
!
!
sip
sip udp 5060
no sip tcp
!
!
!
voice feature-mode network
voice transfer-mode local
voice forward-mode local
!
!
!
!
!
!
!
!
voice dial-plan 1 local NXX-NXX-XXXX
voice dial-plan 2 long-distance 1-NXX-NXX-XXXX
!
!
!
!
voice codec-list standard
  codec g729
!
voice codec-list g711u
  codec g711ulaw
!
voice codec-list All
  codec g729
  codec g711alaw
  codec g711ulaw
!
!
!
voice trunk T02 type sip
  description "xxxx"
  sip-server primary yyy.yyy.yyy.yyy
  domain "xxxxxxx"
  hmr myTrunkOutboundPolicy out
  trust-domain p-asserted-identity-required
  codec-list All both
  authentication username "xxxxx" password "xxxxxx"
!
voice trunk T03 type sip
  description "Primary "
  sip-server primary xxx.xxx.xxx.xxx
  codec-list All both
  transfer-mode network
!
voice trunk T04 type sip
  description "xxx"
  sip-server primary xxx.xxx.xxx.xxx
  codec-list All both
!
!
voice grouped-trunk BELL
  description "provider trunk"
  trunk T02
  accept NXX-NXX-XXXX cost 0
  reject NXX-976-XXXX
!
!
voice grouped-trunk LAN
  description "LAN"
  trunk T03
  trunk T04
  accept 1111112222 cost 0
  reject NXX-976-XXXX
!
!
voice user 1
  connect sip
  password "xxxx"
  alias ping
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
sip grammar from host domain
sip grammar p-asserted-identity host domain
sip grammar to host domain
!
!
!
!
!
!
hmr policy myTrunkOutboundPolicy
  rule-set mySecondRuleSet 10
!
!
hmr rule-set mySecondRuleSet
  message-rule myAddUser message-type any 10
    modify header from position first match-value /([^>]+)(.*)/ new-value /\1;user=phone\2/ 10
  message-rule myAddUSer2 message-type any 20
    modify header p-asserted-identity position first match-value /([^>]+)(.*)/ new-value /\1;user=phone\2/ 10
  message-rule myAddUSer3 message-type any 30
    modify header contact position first match-value /([^>]+)(.*)/ new-value /\1;user=phone\2/ 10
  message-rule myAddUsernew message-type any 40
    modify header diversion position first match-value /([^>]+)(.*)/ new-value /\1;user=phone\2/ 10
!
!
ip rtp quality-monitoring
ip rtp quality-monitoring sip
!
line con 0
  login
!
line telnet 0 4
  login
  password tinman
  shutdown
line ssh 0 4
  login local-userlist
  shutdown
!
!
!
!
!
end

0 Kudos
2 Replies
Anonymous
Not applicable

Re: Invalid when making inbound call

Hello and thanks for posting to our forum.  A debug should help us determine why the call is failing.  Run the following debugs:

debug sip stack message

debug voice verbose

Then make the test call.  The SIP portion of the debug will show the To: and From: as well as the IP where the SIP is coming from.  The Voice portion of the debug will show how the call is being processed in the ADTRAN.  To start, I would compare your accept lists with the number being dialed to make sure there is a match.  If you are still having issues, you can provide the debug or open a ticket with Technical Support.

Thanks,

Geoff

jayh
Honored Contributor
Honored Contributor

Re: Invalid when making inbound call

Your configuration looks reasonable at first glance. 404 errors mean that the other side can't route the call, destination not found. These are often a dialplan issue such as the provider wanting a leading 1 plus ten digits, or not wanting the leading 1 if you provide it, or they want e.164 format. As Geoff mentioned, debugs would shed more light.