Showing results for 
Show  only  | Search instead for 
Did you mean: 
New Contributor

Sending IP4 for RTP over ppp connection


I have a TA924E setup on two WAN connections.
One is a standard interface and the other is using ppp.
When using the ppp interface the TA is sending back for the RTP port:

o=- 1589303742 1589303742 IN IP4
c=IN IP4

Here is the config:

interface eth 0/2
  no ip address
  no shutdown

interface ppp 1
  ip address [IP ADDRESS]
  media-gateway ip primary
  no fair-queue
  ppp pap sent-username [USERNAME] password {PASSWORD]
  no shutdown
  cross-connect 1 eth 0/2 ppp 1

Let me know if I'm missing something.

Thank you.


0 Kudos
1 Reply
New Contributor

Re: Sending IP4 for RTP over ppp connection

Is the debug verbose voice I found:

23:37:55.278 TM.T01 01 SipTM_Accept ERROR: unable to get outbound IP address to add SDP
23:37:55.278 TM.T01 01 SipTM_Accept ERROR! Unable to add SDP to message - using Hold SDP instead