TA924e ANI via DTMF

[mbolton258]

Hello, I have a 924e configured to out pulse DNIS to the FXS ports for a fax server. Is there a way to also get it to send ANI data via DTMF like the Atlas 550 did? It could be *ANI*DNIS* or *DNIS*ANI format.

Mike

[geo]

Hello Mike,

Thanks for posting to the forum.  The TA 900 series supports Feature Group D (ANI*DNIS*) out a CAS T1 trunk as DTMF, but not out FXS ports.  The FXS ports on the TA 900 will only do Loop Start and Ground Start.  Here is a snippet of the voice trunk config:

3rd908e(config)#voice trunk T99 type t1-rbs supervision ?
fgd - Feature Group D
immediate - E&M Immediate
wink - E&M Wink

This mode is only supported in the Network role, where it is connected to a PBX.  Sometimes the "dialtone" command is needed on the trunk for the PBX.

Regards,

Geoff

[mbolton258]

Hi Geoff,

Thanks for the reply. Is there a currentley supported Adtran device that can do SIP to FXS and output ANI*DNIS* via DTMF to the FXS ports? The Atlas 550 did this for PRI, but has been out of production for awhile. There are a few phone systems out there that can do this, put, this is just a fax server, so I'm looking for a solution using an Adtran device if possible.

Thanks in advance,

Mike