I have a 924 I loaded a default config and no it will not compete its boot. I connected a console cable to watch the boot and it reaches 27% and quits. HELP
Firmware could be corrupt. Can you get it into bootstrap mode by hitting [ESC] when it first starts up? If so, upload new firmware to flash. If it won't get to bootstrap mode you have a hardware problem. The good news is that Adtran's warranty on these boxes is really good.
Firmware could be corrupt. Can you get it into bootstrap mode by hitting [ESC] when it first starts up? If so, upload new firmware to flash. If it won't get to bootstrap mode you have a hardware problem. The good news is that Adtran's warranty on these boxes is really good.
I had loaded a default startup config in the wrong place. Tech support helped me solve the problem. I still dont have it setup correctly because I cant get it to register to the SIP server. I maybe calling support again today or hiring some one to assist me since this is my first and I need 2 to deploy like last week.
Cool, reach out if you need help.