Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
ddunagan
New Contributor
‎07-18-2019 01:02 PM

netVanta 1550 PoE switches losing interface access.

I have 9 netVanta 1550 48-port switches. Very basic setup with 2 VLANS. After booting them, while telnetted in, there are no errors. However within 2-3 days I am unable to log into them (SSL, Telnet, or management cable) and if you plug a device into any unused port, there is no connectivity. However, all ports that were active before the interface failed still work.  Rebooting the device returns everything to normal. The CPU load rarely exceeds 50% and the PoE load averages around 25%.

0 Kudos
Reply
1 Reply
Anonymous
Not applicable
‎07-25-2019 01:09 PM

Re: netVanta 1550 PoE switches losing interface access.

This sounds very much like the Firmware has not been updated at the installation to the recommended and supported R13.5.1.

0 Kudos
Accept as Solution Reply