cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
kongwc
New Contributor

Call Drop when dialing to IVR

Hi,

recently, i encountered a problem on NV640.

The users feedback that when they dial to an external party via ISDN which the call is answer by a IVR system.

The call will drop after about 5 minutes.

is there any setting can be done on the gateway?

Labels (1)
0 Kudos
2 Replies
Anonymous
Not applicable

Re: Call Drop when dialing to IVR

Wai Choy Kong,

We will need to see the unit's configuration and the output of the following debug commands for a test call that is disconnected.

debug sip stack message

debug voice verbose

debug isdn L2-formatted

The debug capture should be started before the call is placed, and continue until the call drops.  Also, we will need to know the ANI and DNIS for the test call, or a time stamp of when the call begins, so that we can trace a specific call in the debug output.

Thanks!

David

Anonymous
Not applicable

Re: Call Drop when dialing to IVR

Wai Choy Kong,


I'm going to mark your question as assumed answered, but feel free to come back and comment as to how your issue was resolved.


Thanks!

David