cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Highlighted
New Contributor

TDM routing between FXS and FXO ports configuration examples

Jump to solution

Hi

Could anyone please provide some AOS ( Adtran 6240 ) configuration examples for setting up TDM routing between FXS and FXO ports ?

We’re setting up a fax machine attached to one of FXS ports on the Netvanta 6240 in order to make  outbound calls from this port using the local FXO port


Thank You

Labels (1)
0 Kudos
Reply
1 Solution

Accepted Solutions
Highlighted
Contributor III
Contributor III

Re: TDM routing between FXS and FXO ports configuration examples

Jump to solution

Hello and thanks for posting to our forum.

This is a great guide to follow for FXO and FXS functionality.  It was written for a TA 900 but it will work for a NV 6240. 

https://supportforums.adtran.com/docs/DOC-2617

The only difference may be the port numbers used for the FXS/FXO.  Otherwise the config should be identical.  Let us know if you have any questions.

Regards,

Geoff

View solution in original post

0 Kudos
Reply
2 Replies
Highlighted
Contributor III
Contributor III

Re: TDM routing between FXS and FXO ports configuration examples

Jump to solution

Hello and thanks for posting to our forum.

This is a great guide to follow for FXO and FXS functionality.  It was written for a TA 900 but it will work for a NV 6240. 

https://supportforums.adtran.com/docs/DOC-2617

The only difference may be the port numbers used for the FXS/FXO.  Otherwise the config should be identical.  Let us know if you have any questions.

Regards,

Geoff

View solution in original post

0 Kudos
Reply
Highlighted
Contributor III
Contributor III

Re: TDM routing between FXS and FXO ports configuration examples

Jump to solution

Hello,

I went ahead and flagged this post as “Assumed Answered.” If any of the responses on this thread assisted you, please mark them as either Correct or Helpful answers with the applicable buttons. This will make them visible and help other members of the community find solutions more easily. If you still need assistance, please let us know in a reply.

Regards,

Geoff

0 Kudos
Reply