Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable
‎07-09-2012 11:45 AM

0x20 error message

Jump to solution


Getting a 0x20 error message when trying to boot a NEW Polycom 650 phone to the 7100.

0 Kudos
Reply
1 Solution

Accepted Solutions
Anonymous
Not applicable
‎07-09-2012 11:53 AM

Re: 0x20 error message

Jump to solution

Hello merbac,

It sounds like you have the wrong firmware loaded in the phone.

You can find the firmware files here:

https://www.adtran.com/web/appmanager/portal/Adtran?_nfpb=true&_pageLabel=waverunner_page_support_so...

Make sure to read the release notes to make sure the Polycom firmware is compatible with 7100's firmware.

View solution in original post

Reply
2 Replies
Anonymous
Not applicable
‎07-09-2012 11:53 AM

Re: 0x20 error message

Jump to solution

Hello merbac,

It sounds like you have the wrong firmware loaded in the phone.

You can find the firmware files here:

https://www.adtran.com/web/appmanager/portal/Adtran?_nfpb=true&_pageLabel=waverunner_page_support_so...

Make sure to read the release notes to make sure the Polycom firmware is compatible with 7100's firmware.

Reply
Anonymous
Not applicable
‎07-09-2012 12:37 PM

Re: 0x20 error message

Jump to solution

I actually did, but it looks like one or some of the files didn't transfer when using the FTP this morning. I resent the files over, phones came up.

THANK YOU FOR THE QUICK RESPONSE!:)

Accept as Solution Reply