Adtran
Help
BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable
‎03-03-2015 12:31 PM

Adtran 908e SIP to PRI

Is there any way to configure the PRI to go Out Of Service(Drop the D Channel) if the SIp circuit goes OOS or the router loses communication with the SIP Host?

My PBX never shows the PRI going out of service so when the circuit goes out we cannot fail over to our backup POTS lines

Thanks

JP

Labels (2)
Labels
Tags (2)
Reply
2 Replies
Anonymous
Not applicable
‎03-03-2015 12:37 PM

Re: Adtran 908e SIP to PRI

Yes.

Here is how I set it up:

probe drop-trunk icmp-echo

destination

period 5

tolerance consecutive fail 3 pass 2

no shutdown

!

track test-track

snmp trap state-change

test if probe drop-trunk

no shutdown

!

!

voice trunk T01 type isdn

description "PRI"

resource-selection circular descending

busy-out monitor track test-track

connect isdn-group 1

modem-passthrough

Accept as Solution Reply
Anonymous
Not applicable
‎03-03-2015 12:39 PM

Re: Adtran 908e SIP to PRI

You can find more info here:

https://supportforums.adtran.com/docs/DOC-3409

0 Kudos
Accept as Solution Reply