Adtran
Help
BIG NEWS! The Adtran Support Community is moving! In the next few weeks it will be housed in a new location. Be sure to visit our NEW Adtran Community before the end of July to check it out and verify that you can access all the resources and features that you need. If you discover any issues with your account or access, or just want to let us know about your experience, be sure to use our Feedback Form to let us know!
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
duanek
New Contributor
‎12-17-2015 01:38 PM

How can I set a primary SIP PRI for outgoing voice in a 908e?

How can I set a primary SIP PRI for outgoing voice in a 908e? I have two SIP PRI's going from a C15 soft switch to a 908e, from the switch  side i can set a primary pri to send calls to the 908. I would like to set the 908 side to have the first PRI as the priamry and the second PRI as a backup if the first goes down.

Labels (2)
Labels
0 Kudos
Reply
1 Reply
jayh
Honored Contributor
Honored Contributor
‎12-17-2015 05:22 PM

Re: How can I set a primary SIP PRI for outgoing voice in a 908e?

Create two ISDN groups and two trunks, one for each PRI. Create a voice grouped-trunk for calls delivered to the PRIs. In the voice grouped-trunk for outbound calls to the PRIs put the trunks in the appropriate order. 

0 Kudos
Accept as Solution Reply